MACHINING

Production Facility

24 nos. HMC machines having following specifications
  • Spindle speed 6000 to 12000 rpm
  • Positioning accuracy ±5µm
  • Repeatability : ±3µm
  • Tool magazine : 60 tools
  • Tool change time : 2.7 sec to 4 sec
  • Pallet change time : 8sec
  • Machine rapid rate : 60m/min
  • Tool load capacity : 700 to 1100 kg.
  • Spindle power : 22kw / 32kw
  • All machines are provided with 35 kg/cm2 pressure through spindle coolant facility.
  • Centralised coolant system with coolant tank capacity 55000 lit. The Millipore value of coolant filtered : less than 30mg.
  • General purpose washing machine with 20bar pressure.
  • Tool pre setters : 02 Nos.
  • Tool shrink fit. equipment
  • Tool crib with sandvik Autotas tool management system.
  • Export packing of parts with pre - validation system.
  • QUALITY ASSURANCE

    Co-ordinate measuring machine(CMM)
    1.MAKE : Hexagon metrology
    2.MODEL : Global advantage 12x22x10
    3.SOFTWARE : PC-DMISCAD++2014MR3
    4.PROBING REPEATABILITY : 2.2 + L/333µm
    5.PROBiNG SYSTEM: Hexagon “LEITZ” fixed continuous scanning styli kit LSP-X5

  • Computerised base online air gauging system for bore and outer diameter measurement :
  • Leak testing Facility with air media for crank case leak testing areas like water jackets, oil gallery, body leakages with leak rate 4 to 10 cm3 /min.
  • Electronic height master : Range – 1000mm
  • Calibration lab facility
  • Electronic torque wrench tester : Range 10 to 100 Nm.
  • Millipore checking facility
  • Online machined component inspection.
  • WANT IT MACHINED HERE?

     

    Indus FerroTech offers great Service in Machining and Foundry.Allow us have great opportunity to serve your Reputed Company.


    REQUEST A QUOTE